Skip to main content

How long do Freebord wheels last?

When you watch a Freebord video for the first time, it’s likely that you’ll have two questions right off the bat:

1.) What the !@#$ is that thing?

2.) How long do those wheels last?

Since Freebord Mfg. was founded in 1997, our motto has been the following:

“Progression and innovation are what drive us. Through years of evolution and rider driven design, Freebord has engineered a setup that rides exactly like a snowboard on pavement.”

The Boro

This still rings true today, in fact, Freebord has prototyped and tested hundreds of iterations of wheel formulas. One of the most recent examples of this tech in action is our most advanced center wheel, The Boro .  

Freebord Center Wheel Boro

Buy Boros

This wheel tested off the charts in our durability trials, and it gives the rider more longevity than any other wheel on the market. Center wheels are essential to the Freebord’s design. They act like the base of a snowboard so they are always in contact with the ground, and therefore must endure constant wear. Center wheels last much longer than edge wheels due to the nature of the wear. Our pros generally report several months of hard riding on these babies before they see a need to replace them. 

Da Blues

Next up, is the Da Blues Edge Wheel (78mm | 80a) the best edge wheel we make hands down.  Tweaked and tested over the years, this wheel is the result of extreme testing by Freebord’s Pro and R&D team.

Freebord DaBlues Edge Wheels

Buy DaBlues

Da Blues are the highest performance wheel in our lineup, featuring a custom shape, a secret urethane formula, and a 45mm contact patch to give you the maximum grip while still delivering a consistent and predictable slide. While usage may vary with how hard you are riding, many of our pros literally ride these for several months with no problem.

Variables of Wheel Wear

There are tons of variables that affect how fast your wheels wear but here are the big 3:

1. Environment

Pavement Quality & Hill Steepness

So a big factor in how fast wheels wear is the pavement quality. If it is a smooth freshly paved road, then your wheels won’t wear as fast, but if you’re riding on pavement that resembles a cheese grater then they may wear out faster. Also the steepness of the hill makes a difference because depending on your riding style you could be sliding more. 

Temperature

Heat is a wheel destroyer pure and simple. If you’re out riding on 100ºF pavement then it’s safe to say your wheels are going to take a beating. It’s pretty basic: the heat of the road coupled with the heat from the friction of the wheel sliding along the pavement makes the wheel wear faster. Conversely, if you’re riding on cold pavement you lose way less urethane due to less overall heat.

Moisture

If there is any moisture on the road then the wheels lose traction. Less traction = less wear. That’s why you’ll see videos of people doing long drawn out horizontal slides without flatspotting their wheels. Personally, I love riding on semi-wet roads as it’s a great way to help you master your slides and is forgiving on your wheels!

2. Weight

This is pretty straightforward: if you’re a heavier rider you will burn through wheels quicker than if you were lighter. That’s just how it goes. 

 

3. Riding Style 

If you’re shredding hard then you’re going to be shredding urethane. Think of it just like Ken Block’s gymkhana. If he drove like a normal person, cautiously navigating around all those ridiculous obstacles, he would get a ton of use out of those tires. Same thing on a Freebord, if you are blasting down backcountry runs and busting out huge overslides then you’ll get less life out of the wheels. However, while our pros are on tour (riding ridiculous amounts of hills daily), they consistently report not having to change wheels for several days. 

Also, it should be noted that if you’re straight bombing hills (as opposed to sliding for speed control) then you’ll wear the wheels much less due to the lack of use of the edge wheels (duh). 

Occasionally, you’ll encounter what’s called a “wheel casher”. This is a hill or situation in which all of the factors above align perfectly and can cash a set of wheels quickly. For example, if you’re a heavier rider, on a blistering day, on a insane  grade, with poor pavement quality, and you want to slide all the way down it… you’re going to cash your wheels. 

So as far as how long the wheels will last for the average person, most riders report that their wheels last for months! 

 

Buy Freebord

 

But don’t take my word for it, check out the video below of the CHoE team riding on them for over 100 kilometers in France, or ask the Freebord Facebook Community. 

 

Questions, comments, concerns? Ask me in the comments.

 

Buy Freebord

 

 

 

Justin

Washed up former Freebord team rider, current washed up Freebord team manager. “Give a man a fish and feed him for a day. Don’t teach a man to fish…and feed yourself. He’s a grown man. And fishing’s not that hard” – Ron Swanson

13 Comments

  • Augustine says:

    Will freebord trucks fit on a long board I prefer the width of them better

    • Avatar photo Justin says:

      We do not recommend putting Freebord trucks on a longboard deck, and we have yet to come across a deck that actually fits our truck layout without drilling. Proceed with caution, just remember we gave you fair warning.

      • augustine says:

        Not the whole thing just the hangar

        • Avatar photo Justin says:

          I’m sorry but I don’t understand; Freebord hangars and baseplates do not work with longboard trucks.

        • Kyler says:

          Freebord hangers can fit the baseplate of a longboard truck… Not likely all will work.. But I’ve gotten one pair to work out… It seems weird at first but the stability and control is unreal..

          • Avatar photo Justin says:

            I would love to see pics and video of this beast in action! Please send ’em to me at Justin at Freebord.com!

          • Rooster T Faigen says:

            I’ve been a longboarder all my life. I laminate veneer to make decks and buy decks of all types… I’d call myself a junkie of sorts. I’D love to know what kind of deck you used with freebord gear to make it all fit. I’m a MycGyver with mostly everything I do in the shop. If you could send me pictures of the deck you used as well as the company and model, it would be a thrill to laminate a longboard/freebord hybrid and have the trucks, hangers and footholds all be attached fully functional. Please let me know.

  • Charlie Bruton says:

    Do you know of any great freebord hills in south east England?

  • Chad Husted says:

    What do you recommend about the different wheel sizes? Like what would be the varying differences between say, the 75 mm and the 85mm. Thank you for your time

    • Avatar photo Justin says:

      Unless you’re freestyling hard, it really comes down to durability. Some riders like the Brass Monkeys due to having extreme rocker; however, if you’re a beginner, I recommend going with the DaBlues wheels as the Greengos are more of a budget wheel.

  • Sean Montoya says:

    I’m still having some trouble with board sizing. I’m 5’1 so I really have no idea what is best for me. My stance is about shoulder width apart.

  • Alex Froehlich says:

    Is there a link available to purchase the Da Blues wheels? I have only heard good things about them but can’t seem to find anywhere online to get them.

Leave a Reply